MH VALVE WEDGE COAT OPERATOR I
Company: M&H Valve Company
Location: Anniston
Posted on: October 5, 2024
Job Description:
Job DescriptionEssential Duties and Responsibilities include the
following. Other duties may be assigned.
- 1st Responsibility - Ensuring personal safety and the safety of
your team members.
- Assists supervisors and managers in maintaining a safe and
healthy work environment.
- Wear appropriate PPE which may include fall protection,
respiratory protection, hearing protection, foot, hand, head and
eye protection.
- Uses proper lifting and ergo techniques.
- Reads work orders or receives oral instructions to determine
work assignments, material or equipment needs.
- Follows detailed job specific instructions to make sure
castings are produced in the most efficient manner and to meet
customer specifications.
- Conducts daily inspection of equipment.
- Operates three-stage washer, dry off oven, conveyor system, and
dip tank for adhesive.
- Loads/unloads 2"-12" wedges on the conveyor system using
standard and specialized material handling equipment.
- Operates industrial forklifts along with manual pallet lifting
devices.
- Maintains operating levels of cleaners for the wash system and
levels for the adhesion dip tanks.
- Loads/unloads castings in pre-heat ovens on special fixtures
using special tooling.
- Loads pre-heated castings on patterns/molds and properly
prepares equipment for the injection cycle including setting cores
in cavity mold correctly.
- Loads/unloads strips of rubber into injection molding
machine.
- Operates controls of equipment to maintain set established
standards.
- Performs quality checks to include but not limited to the
following: Adhesion tests, temperature checks, durometer checks,
dimension checks.
- Uses hand tools to perform normal operations of operating
equipment.
- Uses hand trimming tools to remove excess rubber from the
castings and discard.
- Loads/unloads parts from curing ovens based on temperature,
time, and environment requirements.
- Loads/unloads parts into shipping containers in established
quantities and sizes.
- Maintains inventory control by properly scanning inventory,
marking, and/or labeling.
- Cleans patterns, tooling, molds, fixtures, tanks, and equipment
to ensure items are maintained properly.
- Maintains cleanliness of the production
area.Qualifications:
QualificationsTo perform this job successfully, an individual must
be able to perform each essential duty satisfactorily. The
requirements listed below are representative of the knowledge,
skill, and/or ability required. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
essential functions.Education and/or Experience
- High school diploma/GED preferred.
- Experience in injection molding preferred.
- Must be at least 18 years of age.Language SkillsAbility to read
and comprehend casting prints, drawings, and formulation
requirements. Ability to read and comprehend simple instructions,
correspondence, and memos. Ability to effectively present
information in one on one, small groups, and other
employees.Mathematical SkillsAbility to add and subtract two-digit
numbers and to multiply and divide with 10s and 100s. Ability to
perform these operations using units of American money and weight
measurement, volume, and distance.Reasoning AbilityAbility to apply
common sense understanding to carry out instructions furnished in
written, oral, or diagram form. Ability to deal with problems
involving several concrete variables in standardized
situations.Physical DemandsThe physical demands described here are
representative of those that must be met by an employee to
successfully perform the essential functions of this production
required job. Reasonable accommodations may be made to enable
individuals with disabilities to perform the essential
functions.While performing the duties of this job, the employee is
regularly required to stand. The employee is frequently required to
walk, use hands to finger, handle, or feel. The employee is
occasionally required to reach with hands and arms, climb or
balance, stoop, kneel, crouch, or crawl and talk or hear. The
employee must occasionally lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision
and peripheral vision.Work EnvironmentThe work environment
characteristics described here are representative of those an
employee encounters while performing the essential functions of
this job. Reasonable accommodations may be made to enable
individuals with disabilities to perform the essential
functions.While performing the duties of this Job, the employee is
regularly exposed to wide range of temperatures, humid conditions,
moving machinery, dust, fumes, gases, odors, vibrations and varying
noise levels.Additional InformationAll your information will be
kept confidential according to EEO guidelines.Please note this job
description is not designed to cover or contain a comprehensive
listing of activities, duties, or responsibilities that are
required of the employee for this job. Duties, responsibilities,
and activities may change at any time with or without notice.
McWane is a Federal VEVRAA contractor, and an Equal Opportunity
Employer committed to providing equal employment opportunity in all
employment practices. McWane will not discriminate against any
applicant for employment because of their race, color, religion,
sex, national origin, age, sexual orientation, disability, veteran
or service member status, marital status, citizenship status (In IL
- sex, including same sex, ancestry, order of protection status,
physical or mental disability, military status, pregnancy,
unfavorable discharge status, genetic information), (In IA - gender
identity), (In CA- gender identity or expression, and genetic
information) or any other category protected by federal, state or
local law.
Keywords: M&H Valve Company, Montgomery , MH VALVE WEDGE COAT OPERATOR I, Other , Anniston, Alabama
Didn't find what you're looking for? Search again!
Loading more jobs...